PHARMA STATION

Frequently asked questions

Table of contents



We ship our products world wide and all packages are shipped very discreet. Products are repacked with extreme care and precaution, specifically to minimize shipment volume. Our organization name or anything else that would imply pharmaceutical contents of the package is never used in our shipments. The size of our packages are never larger than what would cause unnecessary suspicion. If the order is too large to fit one of these packages, the order will automatically be divided into two or more packages (always included in the S&H-charges). Shipping time is around 5 to 21 working days, defence of destination.

If you have any other questions please contact us! But you can also help yourself with already answerd questions below:


A more in depth guide to data conversion. This will be helpful to people who have trouble converting their units, or understanding things such as I.U., ml, cc, and other terms associated with chemical enhancement use.

Lesson 1: Units and their definitions
i.u. (IU) = international unit. This is a unit used to measure the activity (that is, the effect) of many vitamins and drugs. For each substance to which this unit applies, there is an international agreement specifying the biological effect expected with a dose of 1 IU. Other quantities of the substance are then expressed as multiples of this standard. This also means that this measurement is not based on sheer volume or weight of the substance, but rather the effect.

ml = milliliter. This is a VOLUME measurement. it is 1/1000 of a liter. When talking about water or similar liquids, it is equivalent to one cubic centimeter.

cc = cubic centimeter. This is also a VOLUME measurement. Most syringes measure their capacity in cc's. If you have a 5cc syringe, it will hold ~5ml of liquid in it.

mg = milligram. This is a WEIGHT measurement. It is 1/1000 of a gram. The amount of chemical substance is often measured in milligrams. For injectable solutions, this will be reported as a concentration of weight to volume, such as mg/ml (milligrams per milliliter). In the case of orally administered substances, the weight of chemical is labeled; although the actual weight of the pill/capsule may be much higher, because of the use of filler substances. This means that a small pill may be much more potent than a large pill, so don't judge a pill based on its size, but the actual amount of substance for which it is labeled as.

mcg = microgram = 1/1000 of a mg (milligram) There are one thousand micrograms in one milligram.

Conversion factors:
1000 mcg (microgram) = 1 mg (milligram)

1000 mg (milligram) = 1 g (gram)

1000 g (gram) = 1 kg (kilogram)

1000 ml (milliliter) = 1 liter

1ml (water) = 1cc (water)
1ml (oil) ~ 1cc (oil) (~ denotes approximately equal to)

Lesson 2: Examples putting it all together
Say a user has some Nandrolone Decanoate. One is Deca 300 and the other is Deca 100. Both of these are Nandrolone Decanoate, but they have different concentrations. What this means is....

For the Deca 300:
If you take 1 ml (one milliliter) of this solution, it will take up ~1cc (one cubic centimeter) of space in the syringe. There will be 300mg (three hundred milligrams) of Nandrolone Decanoate in this dosage.

For the Deca 100:
If you take 1 ml (one milliliter) of this solution, it will take up ~1cc (one cubic centimeter) of space in the syringe. There will be 100mg (one hundred milligrams) of Nandrolone Decanoate in this dosage.

If you put the syringes side by side, they appear the exact same, so what is the difference? The Deca 300 has a concentration of 300mg/ml, while the Deca 100 only has a concentration of 100mg/ml. This means that the syringe with Deca 300 has three times (3x) the amount of Nandrolone Decanoate in the same exact volume as the syringe with Deca 100.

A drug's effectiveness has nothing to do with the concentration. If you take three milliliters (3ml) of the Deca 100, it will have the same effect as one milliliter (1ml) of Deca 300.

Lesson 3: How do I work with substances labeled with I.U.'s (International Units) Dosages for substances such as HCG, HGH, and insulin are measured by their respective IU values.

For example, Global Anabolic makes HCG under the brand pregnyl in 1,500i.u. and 5,000 iu concentrations. The drug comes with two vials. One vial of actual HCG powder and one vial with a liquid to reconstitute the powder into an injectable solution.

If you have a 1,500 iu vial of HCG which comes with a 1ml vial of sterile water, once you mix the vials together, you will now have 1,500 iu of HCG in one milliliter (1ml) of solution. If you do not have the proper syringe, it would be quite tricky to break this down into small dosages such as 500i.u. If all you have available is larger syringes such as 3cc or 5cc, a good trick would be to mix the HCG with your own USP grade water. To make it very easy, if you mix three cc's of water with your vial of 1,500 iu HCG, you will now have a nice concentration of 500 iu per milliliter (500 iu/ml). This was calculated by dividing the units by the volume, so 1,500 iu divided by three milliliters (1,500 iu/3ml) is equal to 500 iu per milliliter.

The same applies for HGH.

Thanks for your continued support, Pharma Station strive to bring you the finest products on the market today!


Credit Card

Credit card is fastest, easyest and cheapest transfer, since there is no additional transfering fee. Credit card transactions have maximum order limit of 800 EURO. Name on credit card bill will be name of our credit card provider. Orders paid with credit card can only be shipped to cardholders address.

Money Transfer

  • Is a global leader in money transfer services.
  • Is an industry leader with approximately $4 billion in revenue.
  • Helps consumers and businesses send money and bill payments quickly and reliably.
  • Provides consumers with financial choices, convenience and control.
  • Offers services through Agent locations around the world.

All necessary wire information is included with your order confirmation, which is sent to you immediately after placing your order. For detailed information on how to make a Money Transfer or to find your nearest Money transfer agency.

To send us your payment notification, according to our payment instructions (once payment is made), follow the link in your order confirmation.

Bank to bank transfer

Bank to bank transfer is another payment option we support.

MoneyGram

MoneyGram has been providing trusted payment and financial services since 1940.
The safe, fast way to send and receive money worldwide. MoneyGram

We ship our products world wide and all packages are shipped very discreet.
- Our organization name or anything else that would imply pharmaceutical contents of the package is never used in our shipments.
- The size of our packages are never larger than what would cause unnecessary suspicion. If the order is too large to fit one of these packages, the order will automatically be divided into two or more packages (always included in the S&H-charges).
- Shipments are made from various shipping points in different countries.

Order confirmation with instructions for how to make payment is sent to your email address automatically and immediately after you submit your order. Once payment is received, we process and dispatch your order within 2 business days. Shipping time will depend on various factors such as method of our shipping, postal service efficiency, customs clearance, international transit, etc., which is why we can only give you an approximation based on our statistics and former experience.

Unfortunately, we do not make any manual changes or cancellations to pending orders. Since the order process is entirely computerized, it is much faster, more efficient and less problematic to place a completely new order. So, if you wish to make changes to your order, simply place a new order and disregard your former order number (it will automatically be cancelled and removed from our system if payment is not made within 60 days). NOTE! Since order cancellations are not accepted once payment is received, you must make necessary order changes before payment is made.

We have no limits to how much you can order. However, you should consult with your local FDA office regarding the quantity you would like to order, since there may be import regulations on those specific products and quantity.

Since laws differ from country to country, we recommend you to contact your local FDA or customs office regarding the regulations and restrictions of your country. Are you a legitimate company? We are a professional mail order service licensed to sell and distribute pharmaceutical products. We have been established for over 4 years, supplying original, high-quality anabolic steroids and bodybuilding related products, prescription-free over the Internet.

Since we are specialized in internet mail ordering, our services are only available through our website.

Since our services are optimized to be conducted online and worldwide, You are more than welcome to contact our departments through our website.

A prescription is NOT required to order our products.

As we ship worldwide we are not aware of specific laws and regulations for each country. You will have to make an inquiry about your local laws yourself.

There isn't much you can do. As no-one can prove YOU actually placed an order that order is lost to you and the customs will keep it for good (unless you find your prescription). We are sorry but we take no responsibility for any products that are seized due to improper/incorrect/missing documentation. As per laws of the country where we operate we are not required to check for prescription, however customer is required to have all the papers as required by laws of the country where the products are sent. Please also note that we are aware of the customers need for privacy and some products could potentially be very embarrassing so we strive to ship all products as discrete as possible. In case of any issues we will try to solve any problems on case-to-case basis. If that happens and your order is seized please contact us and we will make further arrangements.

Information on where to send your payment is provided after you place an order, and is sent directly to your e-mail address. Please, follow the payment instructions carefully to avoid unnecessary delay.

Payments made by Money transfer are normally processed and cleared within 1-2 business day. Confirmation of payment will follow once payment has cleared.

We ensure that all packages are shipped with maximum discretion. Since prescription is submitted, products are removed from their original boxes and repacked with extreme care and precaution, specifically to minimize shipment volume. Our organization name is not indicated on any package and shipments are made from various shipping points in the world established in different countries to ensure maximum discretion and highest probability of successful delivery. With custom we have 99% success to USA and Canada, 100% success to any country of EU and 90% success to Australia. Problems with custom are only in New Zeland.

If the order is large enough to not fit in the same shipment envelope as a small sized order, we guarantee the order will be divided into the necessary amount of packages. No matter how large your order is, we reassure you the same discretion level and repackaging is used as with a small sized order.

Estimated deliverance time for our Shipment is around 5 to 21 buisness days.

We have only one methods of shipping. Shipping costs 19 Euros to USA, Canada, Europe and rest of the world.

Yes, we ship to P.O. Boxes, you can use P.O. Box as delivery address, but when entering address of credit card holder do not use P.O. Box address, because it is not allowd, by credit card processor, use another address.

No, we are not able to ship to any APO address?

Since our shipment is not a recorded/registered method of shipment, it does not require a signature upon delivery.

All oil based and water based anabolic steroids should be taken intramuscularly. This means the shot must penetrate the skin and subcutaneous tissue to enter the muscle itself. Intramuscular injections are used when prompt absorption is desired, when larger doses are needed than can be given cutaneously or when a drug is too irritating to be given subcutaneously. The common sites for in tramuscular injectons include the buttock, lateral side of the thigh, and the deltoid region of the arm. Muscles in these areas, especially the gluteal muscles in the buttock, are fairly thick. Because of the large number of muscle fibers and extensive fascia, (fascia is a type of connective tissue that surrounds and separates muscles) the drug has a large surface area for absorption. Absorption is further promoted by the extensive blood supply to muscles. Ideally, intramuscular injections should be given deep within the muscle and away from major nerves and blood vessels.

The best site for steroid injections is in the gluteus medius muscle which is located in the upper outer quadrant of the buttock. The iliac crest serves as a landmark for this quadrant. The spot for an injection in an adult is usually to 7 1/2 centimeters (2 to 3 inches) below the iliac crest. The iliac crest is the top of the pelvic girdle on the posterior (back) side. You can find the iliac crest by feeling the uppermost bony area above each gluteal muscle. The upper outer quadrant is chosen because the muscle in this area is quite thick and has few nerves. The probability of injecting the drug into a blood vessel is remote in this area. Injecting here reduces the chance of injury to the sciatic nerve which runs through the lower and middle area of the buttock. It controls the posterior of each thigh and the entire leg from the knee down. If an injection is too close to this nerve or actually hits it, extreme pain and temporary paralysis can be felt in these areas. This is especially undesirable and warrants staying as far away from this area as possible.

Three acceptable sites for intramuscular injections

A) Buttock
B) Lateral surface of tigh
C) Deltoid region

If the gluteal region cannot be injected for some reason, the second choice would be the lateral portion of the thigh. Usually, intramuscular injections in the thigh are only indicated for infants and children. The vastus lateralis muscle is the only area of the thigh that should be injected intramuscularly. This site is determined by using the knee and the greater trochanter of the femur as landmarks. The greater trochanter is the bony area that you can feel where the femur joins the pelvic girdle. The mid portion of the muscle is located by measuring the handbreadth above the knee and the handbreadth below the greater trochanter. Injecting into the front of the thigh or inside of the thigh is extremely unwise. These areas contain nerves as well as a number of blood vessels.

What to use for injections

It is important to choose the proper syringe for the administration of injectable anabolic steroids. The principle components of a syringe include a cylindrical barrel to one end of which a hollow needle is attached, and a close fitting plunger. The most acceptable syringe for injecting anabolic steroids is a 22 gauge 1 1/2" or 23 gauge 1" apparatus with a 3 cc case. This length allows for penetration to reach deep inside the muscle tissue. Shorter needles, 5/8" or 1/2" are usually not sufficient for intramuscular injections and occasionally leave a portion of the Injection in a subcutaneous area which will cause a swell between the skin and muscle as well as impaired absorption. The gauge size of a syringe represents the needle\rquote s diameter. The lower the gauge number, the wider it is. A 27 gauge needle is very thin. An 18 gauge is quite wide; it is often referred to as a cannon. The 22 and 23 gauge needles are not so large that they are difficult to insert, yet are large enough for solutions to easily be propelled through them. The use of insulin needles is not acceptable; they are simply too small. Usually, insulin pins are 25 to 27 gauge and only a 1/2" long with a 1 cc case.

Injection procedures

There are a number of steps that should be understood in order to complete a safe and proper intramuscular injection. First off, before handling any needles or vials, the user should take a thorough shower. Next, an alcohol swab should be used to clean the injection site and another alcohol swab should be used to clean the rubber stopper on top of the vial which will be drawn from. Then, take a brand new syringe out of its wrapper, remove its plastic top, draw about 2 ccs of air into it and insert it into the vial. Inject this air into the vial; this creates pressure within the vial and makes it easier to draw out oil based preparations. Then, turn the vial upside-down and slowly draw out the oil until you\rquote ve overdrawn at least 1/4 cc. For example, if someone was going to take a shot of 1 cc, they should pull out approximately 1 1/4 to 1 1/2 ccs of liquid, then tap the side of the case to help get the air bubbles that were drawn into the syringe to come to the top. At that point, the excess 1/4 to 1/2 cc could be injected back into the vial and the needle removed. Then, hold the syringe needle-side-up and continue to tap it to encourage all the air bubbles to come to the top of the syringe. Now, take another clean syringe, remove it from its sterile package and unscrew the needle from the syringe. Exchange the brand new needle for the one that has just been injected into the stopper. By using two needles for every injection, you can take advantage of using the full sharpness of the pin. The needle does suffer some dulling when it is pushed through the firm rubber stopper on a vial. It is important not to touch this needle before the injection. It should not come into contact with a counter top, your fingers, nor should it be cleaned with alcohol. This needle is sterile and should not be touched. At this point, once again swab the injection site with alcohol, then press the stopper of the syringe holding it needle-side-up, until the slight air bubbles that are at the top are pressed out. Once a bead of oil has appeared at the top of the needle, allow it run down the surface of the needle which provides lubrication.

At this time, take the syringe and hold it like a dart. Use the other hand to stretch the skin at the injection site and simply push the sharp clean needle in. After inserting it deep into the muscle, pull back on the stopper for a few seconds to make sure it does not fill up with blood which would indicate that the needle had been injected into a blood vessel. Providing there is no blood present in the syringe, slowly press the stopper down until all the oil is injected. Then, quickly pull the needle out and take another alcohol swab and press firmly on the injection site. This will minimize bleeding, if there is any, and by firmly pressing on the injection site and slightly massaging it, some of the soreness may be eliminated. It is important that the liquid is not injected too quickly as this causes more pain at the site during the injection and in the proceeding days.

After this procedure has been completed, return the plastic caps to shield the needles and make sure they are discarded properly.

To avoid discomfort and excessive scar tissue at the injection site, it is not wise to inject more than 2 ccs of solution per shot. It is also not prudent to use the same injection site more than twice a week (once a week is preferred).

Cart


Your shopping cart is empty.